ke.gardens-tricks.com
Interesting

How to make a picket fence in your country house: my garden is my fortress

How to make a picket fence in your country house: my garden is my fortress


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.


A few centuries ago, our ancestors from sharp wooden stakes created a reliable and beautiful fence - a picket fence. Today, this functional protective structure is again becoming popular in suburban construction. The palisade is an ideal addition to a plot with elements of ethno decor or decorated in a rustic style. In addition to its decorative appeal, a fence made of logs serves as an excellent protection against the encroachments of unwanted guests. Breaking down such a fence is beyond the power of even strong men with remarkable abilities. A palisade is a great alternative to traditional concrete, brick or metal defenses. A palisade can be erected in just a few days, and a wooden fence will serve for more than a dozen years.

We procure materials for construction

The palisade is assembled from cylindrical wooden logs with the same trunk diameter. Since today the owners of suburban areas do not need to defend themselves behind a powerful palisade from enemy attacks, it is enough to use logs with a diameter of 10-15 cm to equip the fence.

The height of the logs is determined taking into account the purpose of the enclosing structure. For an outdoor fence that reliably protects against the penetration of thieves, logs with a height of at least 2 meters will be required. Small logs half a meter high are suitable for arranging internal fences that delimit the area of ​​the site and enclose domestic animals.

So that the logs do not stagger in the wind and are securely fastened, they must be buried. It is possible to fix the logs on a transverse beam raised above the ground, which is fixed on the supporting pillars of the enclosing structure. In this case, the logs will not be buried and will be placed in full height above the ground.

When deciding on the height of the product, it should be borne in mind that with the traditional method of arrangement, 1/3 of the barrel height will be spent on securing the structure

Choosing material for the fence, you must focus primarily on the quality of the logs

Saving is not appropriate here: the service life of the entire structure depends on the quality of the product. Therefore, it is better to spend more, but get a fence that will definitely last a couple of decades, than to save money and purchase a fence for only 2-3 years. The surface of the logs in cross-section should not have any recesses and protrusions. A distinctive feature of the stockade is its pointed tops.

A sharpened log looks like a large, sharpened simple pencil. The logs are sharpened at an angle of 35-40 ° using an ordinary small hatchet.

Processing and protection of logs

With the traditional method of arranging a picket fence, part of the log will be buried in the ground, this is fraught with rotting wood. An unprotected tree will become unusable and collapse in 2-3 years, and the protective structure will have to be completely replaced with a new one. To prolong the life of the picket fence, our ancestors processed the lower part of the stakes by charring at the stake. The result was a 15 cm charred crust that prevented the wood from breaking down. Not only a part of the log buried in the ground was subject to charring, but also a section of the trunk 20-25 cm above the ground. This simple procedure will not only protect the wood from decay, but also protect it from parasites.

Today, a simpler method of wood protection is used. Before digging in, the bottom of each log is immersed in hot bitumen

Related article: Review of wood protection products against moisture, fire, insects and decay

Palisade construction process

The traditional way of arranging a picket fence looks like this: the pointed lower end of the log is stuck into the ground, then a little water is poured into the hole and the same pillar is re-inserted. Screw in the log until it is firmly fixed in the soil. To facilitate the process, use a heavy hammer, but work with it extremely carefully so as not to damage the integrity of the logs. Some builders, in order to protect the stakes from chips and cracks, put protective plastic caps on the hammers.

The modern version of the construction of a picket fence provides for the arrangement of a trench with a depth of half a meter

The bottom of the trench is covered with a 20-30 cm sand or crushed stone pillow. After that, stakes are installed on it close to each other, preventing the formation of gaps between them. The trench is covered with a layer of earth and carefully compacted. To increase the efficiency of tamping, the soil should be watered with water. It is possible to increase the reliability and strength of the enclosing structure by additionally using two horizontal crossbeams made of thick timber. They are placed parallel to each other: the lower one at a height of 20 cm from the ground level, and the upper one - 20 cm below the tops of the palisade.

At the final stage of arranging the fence to make the picket fence more natural, it is advisable to treat its surface with transparent varnish, primer or wood stain

Advice. Using a different concentration of stain, you can increase the decorative effect of the fence by painting it in honey-golden or brown-chocolate shades.

Decorative option - wicker palisade

To style the interior space of the site, you can use a wicker palisade.

A beautiful wicker fence will not only serve as a fence for paths and flower beds, such an element of landscape design will rightfully become a real highlight of the decor

A number of the main advantages of wicker fences include:

  • Environmental friendliness. When arranging the wattle fence, only natural ingredients are used that do not harm human health.
  • Decorativeness. Multilevel wicker fences look interesting in any corner of the site: as miniature fences for mixborders, as elements of territory zoning, and even as a full-fledged high fence.
  • Ease of construction. Even a novice gardener can master the fence weaving technique.

For the manufacture of such a fence, you can use the branches of a flexible vine, hazel, willow and even oak or pine.

The material for the wattle fence is harvested in the fall. At this time, sap flow in plants is inhibited and growth stops. Branches with a thickness of 1-3 cm are best suited for work.

When deciding to equip a wicker fence on the site, it is necessary to mark the territory. A shallow trench is dug at the designated place, which is filled with a layer of sand. Such a sand cushion will provide drainage, thereby preventing decay of the buried part of the stakes.

After that, you can drive in small stakes, placing them at a distance of half a meter from each other. The base is ready, you can start weaving.

Advice. To make the branches more flexible, you can pre-soak them in warm water for a couple of days. To extend the life of stakes and branches, they must be treated with an antiseptic.

Weaving starts from the bottom tier. The technology is quite simple: the rods must be wound in turn from opposite sides of the stakes and pulled along their entire length. As necessary, short rods are lengthened, while long ones are cut with a secateurs.

  • Print

Rate the article:

(1 vote, average: 5 out of 5)

Share with your friends!


Modern types of fences for a private house

Fences and fences

Fences are no less varied than the private houses that they fence. And if we take into account the wider selection of materials and their combinations, then, perhaps, even more. But even when choosing the best option, you need to take into account the regulatory requirements so as not to have problems with neighbors and local governments.

  1. What you need to know before installing a fence
  2. Classification of fences
  3. Appointment
  4. Execution
  5. Materials (edit)
  6. Wooden fences
  7. Rack wooden fences
  8. Board
  9. Other options for wooden fences
  10. Metal fences
  11. Brick fence

From planks

A wooden fence made on the basis of an unedged board looks almost perfect with any wooden structure.

As a rule, plank girders are fixed between wooden support posts, and the standard protection of the ends of the posts from atmospheric precipitation is provided by an inclined bar.

Unedged fence

The advantages of this option include the simplicity of self-assembly and disassembly, the cost available to a wide range of consumers, as well as the ability to choose decorative elements.

The disadvantages are represented by the relative durability and the need to apply sufficient wood processing with special compounds.


Photo gallery of finished fences

The photo shows different ways of laying cylinders, examples of combined fences made of logs.

For owners of suburban areas who want a fence made of natural material, wooden logs will be an excellent solution. In addition, in terms of strength and aesthetics, they are not inferior to concrete, brick or stone.


Watch the video: How The Edwardians Threw Parties. Edwardian Farm EP9. Absolute History


Comments:

  1. Baen

    Great answer, congratulations

  2. Gohn

    I mean you are not right. I can prove it. Write to me in PM, we will handle it.

  3. Eibhear

    It agree, very useful piece

  4. Tasunke

    Good topic

  5. Deogol

    Something does not come out like this nothing

  6. Shakagrel

    I fully share her point of view. In this nothing in there and I think this is a very good idea. I agree with you.



Write a message